(2) Starting from the special function switch
To start the sequence program monitor (Ladder), touch a special function switch that has the following settings:
[Sequence Program Monitor (Ladder)] is selected for [Switch Action], and [Use One-touch Ladder Jump] is selected.
To start the sequence program monitor (R ladder), touch a special function switch that has the following settings:
[Sequence Program Monitor (R ladder)] is selected for [Switch Action], and [Use One-touch Ladder Jump] is
selected.
Operation at start differs depending on the setting contents of the special function switch.
For the setting items for the special function switch, refer to the following.
➠
(○: Set, ×: Not set)
Search Method
Specify Search Device
Specify Connected Station
*1
*2
(a)
Operations for searching a device with specifying the file name
Starting the sequence
program monitor
(Ladder) or the
sequence program
monitor (R ladder)
(b)
Operations for searching a device without specifying the file name
Starting the sequence
program monitor
(Ladder) or the
sequence program
monitor (R ladder)
(c)
Operations for searching a connected station with specifying the file name
Starting the sequence
program monitor
(Ladder) or the
sequence program
monitor (R ladder)
(d)
Operations for setting a connected station without specifying the file name
Starting the sequence
program monitor
(Ladder) or the
sequence program
monitor (R ladder)
4 - 12
4.3 Display Operation
GT Designer3 (GOT2000) Screen Design Manual
Setting
*1
*2
When [Specify Search Device] is selected, set [Ladder Search Device] and [Ladder Search Mode].
The setting of PLC station number is included in the [Ladder Search Device] setting.
When [Specify Connected Station] is selected, set [CH No.] and [Network].
If [Other] in [Network] is selected, also set [Net No.], [Station No.] and [CPU Machine].
Automatic PLC read
→
(The set sequence
program file)
Automatic PLC read
→
(All sequence
program files)
Automatic PLC read
→
(The set sequence
program file)
→
PLC read screen
POINT
POINT
POINT
Operations for the special function switch when not using the One-touch Ladder Jump
function
When the [Use One-touch Ladder Jump] is not selected, the operation for touching the special
function switch is the same as when starting from the utility.
➠
4.3 Display Operation
Specify Search File
○
×
○
×
Automatic search for
Ladder Search
→
Device
(Coil/Factor)
Automatic search for
Ladder Search
→
Device
(Coil/Factor)
Ladder monitor
→
screen
Operation for touching the special
function switch
➠
(a)
➠
(b)
➠
(c)
➠
(d)
Ladder monitor
screen
→
(The search result is
displayed.)
Ladder monitor
screen
→
(The search result is
displayed.)