Key Functions - Mitsubishi Electric GOT2000 Series User Manual

5.4.2

Key functions

The following shows the functions of the keys used for operating the PLC read screen.
■1. PLC read screen
The following shows the functions of the operation keys on the PLC read screen.
1) [←Back]
Returns the screen to the last screen that is displayed right before the PLC read screen appears.
The key is disabled when the last screen is the GOT utility screen or user-created monitor screen.
2) [Select CPU]
Displays the communication setting window.
➠
3) Exit key
Exits the sequence program monitor (SFC) and returns the screen to the sequence program monitor (SFC)
startup screen.
4) Scroll key
Scrolls the display up or down.
5) [Recommend] key
Available only when [0:Program Memory] is selected from the target drive list (target controller).
Touching the key selects all the SFC program files, common comment files, and comment files for the selected
SFC program files in the file list (target controller).
When files with the same name are displayed in the file list (target controller) and file list (GOT), touching the
key selects a file as shown below.
• For SFC program files
When the updated dates and times differ between the files, touching the key selects the file in the file list
(target controller).
When the updated dates and times are the same between the files, touching the key selects the file in the file
list (GOT).
• For comment files
When the updated dates and times differ between the files, touching the key selects the latest file.
When the updated dates and times are the same between the files, touching the key selects the file in the file
list (GOT).
6) [Proseed] key
Writes the file selected in the file list (target controller) into the SD card displayed in the target drive list (GOT).
The file written into the SD card on the PLC read screen is stored in the SEQDAT folder.
After writing, among files other than comment files in the SD card, files that are not selected in the file list
(GOT) are deleted. Then, the program list window appears.
➠
5 - 16
5.4 How to Operate PLC Read Screen
1) 2)
5.4.1 ■3. Communication setting window
5.4.1 ■4. Program list window
3)
4)
5) 6)