Batch Monitor - Mitsubishi Electric GOT2000 Series User Manual

3.5

Batch Monitor

The device monitor is a function that specifies the start device in a range of devices and monitors the start and the following
successive devices in a batch.
■1. Screen display and the key function
1)
2)
6)
7)
1) Monitor category display
Displays a monitor category of the monitor screen that is currently displayed.
2) Monitor category change key
Use this button to select a monitor category.
Select from [Selected], [TC monitor], and [BM monitor].
3) Screen switching key ([4 screens], [One large screen])
Switches the screen display between the full screen display and the quad screen display.
4) [Exit] key
Exits the device monitor.
5) Monitor target display
Displays the channel No., network No., station No., and CPU No. of the monitor target.
6) Monitor device display area
Displays the monitor device display area.
Device number
Device name
Device comment
Device number
Device name
Device comment
[Previous Device]
[Next Device]
Device name
3 - 38
3.5 Batch Monitor
10)
9) 11)
8)
Item
Displays the devices preceding those on display. (Displays another part of the range.)
Displays the devices following those on display. (Displays another part of the range.)
Displays the device name of the monitor device.
If a bit device is the target, the status is indicated as shown below.
• ●: Bit ON
• ○: Bit OFF
12) 13)
Device value
Bit device
Device value
Word device
Description
3)
4)
5)
Display format