Key Functions - Mitsubishi Electric GOT2000 Series User Manual

*1 The following shows the numbers of rows and contacts that are displayable in the ladder display area.
*2 The conductive status of the following instructions is displayed only on the screen.
SET, RST, PLS, PLF, SFT, SFTP, FF, DELTA, DELTAP, MC
4.6.2

Key functions

The following shows the functions of the keys used for operating the Ladder monitor screen.
Key
[←Back]
[Device test]
[Edit]
[Find]
[Display]
[Monitoring mode]
4 - 28
4.6 How to Operate Ladder Monitor Screen
Maximum
GOT
number of
displayed
GT27-X
GT27-S, GT25-S
GT27-V, GT25-V
Returns the screen to the last screen that is displayed right before the Ladder monitor screen appears.
The key is disabled when the last screen is the GOT utility screen or user-created monitor screen.
Sets the device test mode.
Touching the key in the device test mode cancels the device test mode.
➠
4.9 Test Operation
Displays the Edit menu. Touching [Start editing] displays the Ladder editor screen.
➠
4.7 How to Operate Ladder Editor Screen
Displays the Find menu.
➠
4.6.3 ■2. Find menu
Displays the Display menu.
➠
4.6.3 ■3. Display menu
Displays the Monitoring Mode menu.
➠
4.6.3 ■4. Monitoring Mode menu
The comment and note of the touched line can be displayed/hidden.
If the touched line is the first line in the ladder block, the statement of the touched ladder block can be
displayed/hidden.
Scrolls the display area up and down by one line.
Scrolls the display area up and down by one page.
When comments are
displayed
Maximum
number of
displayed
lines contacts
6 11
4 11
3 11
Function
When comments are not
displayed
Maximum Maximum
number of number of
displayed displayed
lines contacts
13 11
9 11
7 11