Mitsubishi Electric GOT2000 Series User Manual page 322
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (634 pages) ,
- Hardware user manual (438 pages)
Table of Contents
Advertisement
3) Key to call a screen
[DI/DO] key
[Amp.Inf] key
[ABSdata] key
[UnitCompo.] key
4) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
5) [Cancel Print] key
The touch operation of this key is invalid.
■4. Amplifier information display screen
The following describes the display data of the amplifier information display screen and the key functions displayed on
the screen.
(1) Displayed contents
1) Display area
Displays the amplifier information.
[Servo amplifier model.]
[Amplifier Firmware Version]
[Accumulated power-on time]
[Num. of inrush cur. sw. time]
[Optional card model]
[Motor model]
[Motor ID]
9 - 22
9.4 Operations of Servo Amplifier Monitor Screens
Item
Changes to the DI/DO display screen.
➠
Changes to the amplifier information screen.
➠
Changes to the ABS data screen.
➠
Changes to the unit composition list screen.
➠
9.4.8 Hard copy output
1)
Item
Displays the model name of the servo amplifier.
This is displayed only for MR-J3-□A or MR-J4-□A.
Displays the software number of the servo amplifier connected to the GOT.
Displays the cumulative time of the control power-on after the product was shipped from the
factory.
This is displayed only for MR-J3-□A or MR-J4-□A.
Displays the number of times the rush relay has been turned on/off after the product was
shipped from the factory.
This is displayed only for MR-J3-□A or MR-J4-□A.
Displays the model name of the option card installed in the servo amplifier.
If no option card is installed, then "No connection" is displayed.
This is displayed only for MR-J3-□A or MR-J4-□A.
Displays the model name of the servo motor connected to the servo amplifier.
This is not displayed when monitoring the MR-J2M-P8A.
Displays the ID of the servo motor connected to the servo amplifier.
This is not displayed when monitoring the MR-J2M-P8A.
■2. DI/DO display screen
■4. Amplifier information display screen
■5. ABS data display screen
■6. Unit composition list display screen
Description
Description
Advertisement
Table of Contents
