Mitsubishi Electric GOT2000 Series User Manual page 599
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (634 pages) ,
- Hardware user manual (438 pages)
Table of Contents
Advertisement
(3) Data link information
Item
[Com Status]
[Cause of Ssp]
[Cause of Stop]
(4) Transient status
Item
[Transmission Err]
[ErrCode]
Displays the communication (Data link) status of the host station.
• [D-Link in prog.]: Data link in progress
• [D-Link Stop(A)ss]: Cyclic transmission stopped from other station
• [D-Link Stop (H)]: Cyclic transmission stopped by host station
• [B-Pass exec (No Area)]: Host B/W send no allocation
• [B-Pass exec (Param Err)]: Error in host parameters
• [B-Pass exec (Param unreceived)]: Common parameters not received
• [Disconnect (No B-Pass)]: Station numbers duplicated, cable not connected
• [Disconnect (Line Err)]: Cable not connected
• [Testing]: Testing online/offline
• [Reset. in prgr.]: Hardware failure
Displays the cause for which the communication (Transient transmission) of the host station is disabled.
• [Normal Comm]: Communicating normally
• [Offline]: Offline
• [Offline test]: Testing offline
• [Initialize]: Error (error code: F101, F102, F105)
• [Change Ctrl Sta]: Error (error code: F104, F106)
• [Testing Online]: Error (error code: F103, F109, F10A)
• [Baton Missing]: Error (error code: F107)
• [Baton Duplicated]: Error (error code: F108)
• [Dup Sta No]: Error (error code: F10B)
• [Dup Ctrl Sta]: Error (error code: F10C)
• [Rcv Retry Err]: Error (error code: F10E)
• [Send Retry Err]: Error (error code: F10F)
• [Time Out Err]: Error (error code: F110)
• [Abnormal Line]: Error (error code: F112)
• [Disconnection]: Error (error code: F11B)
• [No Own Sta Baton]: Error (error code: F11F)
• [Other (error code)]: Error (error code: displayed)
Displays the cause for which the data link (Cyclic transmission) of the host station is disabled.
• [Normal]: Communicating normally
• [StopOrder]: Cyclic transmission of all stations stopped from host station or other stations
• [No Shared Param]: Parameters not received
• [Bad Shared Param]: Set parameter error
• [Bad Self Sta CPU]: A medium/critical error occurred in the host CPU
• [Com Aborted]: Host data link error occurred
Displays the number of transient transmission errors.
A history of 16 errors is displayed in 16 rows, starting from the latest one.
Description
Description
21.4 Display Contents
21
21 - 13
Advertisement
Table of Contents
