Mitsubishi Electric GOT2000 Series User Manual page 580

■1. Start operation using the special function switch
The CNC monitor 2 can be started by using a special function switch.
To display the CNC monitor 2 screen for the set controller by touching the special function switch, configure the
following settings for the switch.
• Specifying a keyboard
• Specifying the connection destination
• Specifying the initial screen
• Specifying a system number
The operation at startup differs according to the special function switch settings.
For the setting items for the special function switch, refer to the following.
➠
■2. Changing screens
The initial screen specified with the special function switch appears at the next startup.
If the initial screen is not specified, the last displayed screen appears at the next startup.
For the details of the special function switch setting, refer to the following.
➠
20 - 6
20.3 Operations for Display
GT Designer3 (GOT2000) Screen Design Manual
At the second
or later startup
user-created monitor screen
Rtn
When the CNC monitor 2 is exited with the [Rtn] key, the last displayed screen
appears at the next startup of the CNC monitor 2.
GT Designer3 (GOT2000) Screen Design Manual
Start
Utility
or
At the first startup
Communication setting window