Active Step List Window - Mitsubishi Electric GOT2000 Series User Manual

14.4.4

Active step list window

The active step list window displays active steps.
■1. Displayed contents
No. Item
1) Keys
Active step display
2)
area
■2. Key functions
Key
14 - 16
14.4 Operation Procedures
1)
2)
Keys for operations on the active step list window.
Displays the active step numbers and comments set in the active step.
The step or transition is displayed as below.
• Not locked: Yellow
• Locked: Pongee
Touching the step or transition displays the step or transition on the SFC diagram monitor screen.
In addition, the program is displayed on the detailed program window. (When the step or transition
is locked, the authentication is needed on the password input window.)
The following shows the types of steps and transitions.
• Kn: Motion control step
• Fn: Once execution type operation control step
• FSn: Scan execution type operation control step
• GSUB: Subroutine call/start step
• Gn: Shift, Shift Y/N, WAIT and WAIT Y/N
• WAITON: WAITON
• WAITOFF: WAITOFF
Depending on the step/transition, the displayed contents of comments may be as follows.
• GSUB (Subroutine call/start step): Call destination/startup destination program name
• WAITOFF and WAITOFF: Bit device name
POINT POINT POINT
Precautions for changing the motion controller CPU to the debug mode
When MT Developer/MT Works2 changes the motion controller CPU to the debug mode, Shift Y/
N and WAIT Y/N in active status may not be displayed in the active step display area.
Check the active status of Shift Y/N and WAIT Y/N with MT Developer/MT Works2.
Closes the step list window and displays the active step list window.
➠
14.4.3 Step list window
Closes the active step list window.
Scrolls the display area up and down by one line.
1)
Display contents
Function