Mitsubishi Electric GOT2000 Series User Manual page 197

■4. When monitoring MELSECNET(II)
When connected to a QnACPU and the master station of the MELSECNET(II), monitoring cannot be done with the
keyword being defined.
■5. When the CPU type of the connection target of the GOT is AnNCPU or AnACPU
Even when using the network module of the MELSECNET/10, the network information that can be monitored is the
content of the MELSECNET(II).
■6. Display of loop status for CC-Link IE field network
In ring topology with CC-Link IE field network, if an error occurs in a local module which is not directly connected to a
master module and the network comes into loopback status, information cannot be acquired from the master station.
Therefore, in the above case, the loop status cannot be displayed on the line monitor normally.
• When an error occurs in a local station which is directly connected to a master station
Master station
• When an error occurs in a local station which is not directly connected to a master station
Master station
Local station
Error
The loop status can
be displayed normally.
Local station
GOT
Local station
The loop status cannot
be displayed normally.
Error
Local station
GOT
6.2 Specifications
6
6 - 9