Graph Setting] Window - Mitsubishi Electric GOT2000 Series User Manual

8) [Tools] key
Displays the [Graph setting] window.
Select the items to be displayed, and set the positions of scales.
➠
9) [Onset data] key
Switches the screen to the [(At alarm occurrence)] screen.
➠
This key is disabled when data is read from a file.
10) [Recorder info.] key
Switches the screen to the [Drive recorder information list] screen.
➠
11) Unit by analog channel
Unit in which the data of an analog channel is measured
12) Scroll keys by analog channel
Scroll the waveform data of an analog channel up or down one scale mark.
To continue scrolling the waveform data, touch and hold a scroll key.
13) Scale
Scale of waveform data
The color of each line on the right of scale values corresponds to the color of each line in the waveform.
To change the display position or scale, touch the [Tools] key.
14) Sampling time
Sampling time of the drive recorder function on the servo amplifier side
15) Graph display area
Displays digital and analog waveform data.
An arrow is displayed on the right edge of a digital waveform.
The digital waveform data displayed at the same height as the arrow is in the OFF state, and the data displayed
above the arrow is in the ON state.
To change the display position of digital waveform data, touch the [Tools] key.
To change the display position of analog waveform data, touch a scroll key of an analog channel or the [Tools]
key.
16) Trigger point
Timing at which data is saved by the drive recorder function on the servo amplifier side
17) Scroll keys
Scroll the graph display area up or down one scale mark.
18) Scroll bar
Touch an empty area of the scroll bar left or right of the knob to scroll the graph display area left or right one
scale mark.
Alternatively, touch and slide the knob to scroll through the area.
23 - 18
23.5 [Graph waveform] screen

23.5.1 [Graph setting] window

23.6 [(At alarm occurrence)] screen
23.4 [Drive recorder information list] screen
Digital waveform data
Analog waveform data
ON
OFF