Mitsubishi Electric GOT2000 Series User Manual page 113

■1. Communication setting window
(1) Displayed screen
1) 3)
The following table shows the displayed contents.
No.
1) CH No. input area
2) Network No. input area
3) Station No. input area
4) CPU No. input area
5) CH No. selection key
6)
(2) Key functions
Key
[X]
[AC]
[Del]
[Enter]
4) 2)
Item
Set the CH No. for the target controller.
Set the network No. for the target controller.
Set the station No. of the target controller.
When the station No. is set to the host station (FF), set the network No. to 0.
Set the CPU No.
Select a CH No.
Keys Keys for operations in the communication setting window shown in (b). (Touch input)
Closes the communication setting window.
When any of the CH No., network No., station No., and CPU No. is not input and the monitor target
is not set, the communication setting window does not close.
Moves the cursor among the input areas.
Deletes all the input values and characters.
Deletes an input value or character.
Moves the cursor when the cursor is in the CH No. input area, network No. input area, or station
No. input area.
When the cursor is in the CPU No. input area and settings for the CH No., network No., and station
No. are completed, the communication setting window closes and the PLC read screen appears.
1) 3)
5)
Description
Function
4.5 How to Operate PLC Read Screen
4) 2)
4
5)
4 - 25