Mitsubishi Electric GOT2000 Series User Manual page 239

■1. Changing screens
user-created monitor screen
[END] key
System Configuration screen
[END] key
Monitor menu screen
[Mon. Menu] key
Monitor screen of selected function
At next startup, the last exited screen is displayed.
However, the last exited screen will not be displayed when the GOT is restarted due to an installation of the OS, turning
the GOT power from off to on, or a reset.
When the function is started with a special function switch to which a connection destination different from the one at
the last exit is set, the system configuration screen appears.
Start
Utility Main Menu
or
Communication
setting window
[Ch:] key
(Select the motion controller CPU
to be monitored.)
[Motion Monitor] key
(Menu selection)
[END] key
[Sys. Conf] [Parameter Set.]
key key
Password input key window
[Sys. Conf] key
Parameter setting screen
[END] key
7.3 Operations for Display
[END] key
7 - 7
7