Mitsubishi Electric GOT2000 Series User Manual page 545

18. CNC DATA I/O
18.1 Features
With the CNC data I/O function, the GOT can copy, compare, and delete machining programs, parameters, and others in the
CNC connected to the GOT.
18.2 Specifications
18.2.1 System configuration
This section describes the GOTs that support the CNC data I/O, the target CNC, and the connection types between the GOT
and the CNC.
For connection type settings and precautions regarding the communication unit, cable, and connection type, refer to the
following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
■1. GOT
The CNC data I/O is available on GT27-X, GT27-S, and GT25-S.
■2. Target controller
Controller
CNC C70
■3. Connection type
This function can be used in the following connection types.
(○: Available, ×: Unavailable)
Name
CNC data I/O
*1 Applicable only with the Display I/F connection.
*2 When the CC-Link IE Field Network Ethernet adapter module is used, the CNC data I/O cannot be used.
■4. Required system application (extended function)
For the system application (extended function) required, refer to the following.
➠ 1.2 System Applications (Extended Functions) Required for Each Function
(1) System application (extended function)
Write the package data that contains the system application (extended function) for the CNC data I/O to the GOT.
For the communication method with the GOT, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
(2) System application (extended function) size
To install a system application (extended function) to the GOT, enough space in the user area is required.
For information on how to check the available space of the user area and each data size, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
■5. Required hardware
Data storage is required for the CNC data I/O.
Copy, compare or delete the CNC data.
Function
Description
Data I/O between the CNC and
GOT
Data strage
Connection type between GOT and CNC
Bus connection
○
18.1 Features
18
*2
Ethernet connection
*1
○
18 - 1