Mitsubishi Electric GOT2000 Series User Manual page 332

Step 6.
The parameter setting is changed on the parameter setting screen.
Select the changed parameter item, and touch the [Write] key.
If there are multiple parameter items with changed settings, touch the [Write All] key to write all parameter
items with changed settings.
Step 7.
A confirmation window appears.
Touch the [OK] key to write the parameter setting(s) to the servo amplifier.
To cancel writing of the parameter setting(s), touch [Cancel] key.
This completes the writing operation of the parameter setting.
9 - 32
9.4 Operations of Servo Amplifier Monitor Screens
POINT POINT POINT
(1) Storage destination of new parameter settings
New parameter settings are written to the E2PROM of the servo amplifier.
Consequently, the written parameter setting is retained even if the power of the amplifier is
off.
(2) Precautions for changing the parameter setting
If the following parameter settings are changed on the servo amplifier, also change the
settings on the GOT setup screen in the same way.
➠
9.4.2 Setup
If the settings on the setup screen and the servo amplifier do not match, normal
communications with the servo amplifier may not be performed.
• Station number setting
• IFU station number setting