Operation Of Each Intelligent Module Monitor Screen; Composition Of The System Configuration Screen And Key Functions - Mitsubishi Electric GOT2000 Series User Manual

8.4

Operation of Each Intelligent Module Monitor Screen

This section describes the operations of the screens when using the intelligent module monitor.
➠
8.4.1

Composition of the system configuration screen and key functions

This section describes the configuration of the System Configuration screen that is displayed after startup of the intelligent
module monitor and the functions of the keys displayed on the screen.
■1. When using the RCPU, QCPU (Q mode), QSCPU, or LCPU
(1) Displayed contents
1) Monitored station display
Displays the channel number, network number and station number of the monitored station.
2) Display of modules installed in the monitored station
Displays the model name, I/O points, and start I/O number for the modules installed in the monitored station.
The model name of the module and related data are displayed at the end of the module data readout from the
PLC CPU.
For an intelligent function module that cannot be monitored, the model name is displayed as "SP".
The module icon becomes the key to switch to the screen where the monitoring of that module is performed.
The communication setting window is displayed for the MELSECNET/H connection or MELSECNET/10
connection.
➠
Displays the CPU Nos. for the CPUs and the control CPU number for the installed modules when there are
multiple CPU systems.
3) Touch key
The keys used for the operations on the system configuration screen.
8 - 10
8.4 Operation of Each Intelligent Module Monitor Screen
8.4.1 Composition of the system configuration screen and key functions
8.4.2 Setting method for other station monitoring
8.4.3 Composition of PC Information monitor screen and key functions
8.4.4 Composition of the unit detail info screen and key functions
8.4.5 Composition of the intelligent module monitor screen and key functions
8.4.6 Specifying a module to monitor and selecting monitor menu
8.4.7 Testing of the intelligent function module
1)
2)
3)
8.4.2 Setting method for other station monitoring
3)
3)