How To Operate Plc Read Screen; Displayed Contents - Mitsubishi Electric GOT2000 Series User Manual

4.5

How to Operate PLC Read Screen

On the PLC read screen, the GOT reads sequence programs and comment files used for the sequence program monitor
(Ladder) or (R ladder).
The following describes how to operate the PLC read screen.
4.5.1

Displayed contents

This section explains the structure of the PLC read screen and the functions of the keys displayed on the screen after the
sequence program monitor (Ladder) or (R ladder) is started.
No. Item
1) PLC name
2) Target controller
3) Keys
Target drive list (target
4)
controller)
5) File list (target controller)
6) Target drive list (GOT)
7) File list (GOT)
8) Total file size
4 - 22
4.5 How to Operate PLC Read Screen
1) 5)
3)
4)
6)
8)
10)
Displays the label set in the PLC name setting for the target PLC CPU.
Displays CH No., network No., station No., and CPU No. of the target PLC CPU.
Keys for operations on the PLC read screen shown in section 4.5.2. (Touch input)
Displays the target PLC CPU model and the drives in a list.
Selecting a drive displays files within the drive in the file list (target controller).
For the drive that stores files selected in the file list (target controller), [*] is displayed to the left of
the drive name.
Displays the program types, file names, titles, sizes, dates, and times of all the files within the
drive selected in the target drive list (target controller).
(The date and time show those of updated files.)
A file to be read can be selected from the file list. (The selected file is highlighted.)
When the connection destination is an RCPU, only file names are displayed. (You cannot select
a file.)
For program files, only sequence program files in the program memory can be selected.
For selecting the file name selected in the file list (GOT), the file selection in the file list (GOT) is
canceled.
When a password is set for the selected file, the password input window appears.
➠
■1. Password input window
Displays the drive set for [Data save location] in the sequence program monitor settings. (Only
the A drive (standard SD card) or B drive (USB drive) is available.)
For the drive that stores files displayed in the file list (GOT), [*] is displayed to the left of the drive
name.
Displays the program types, file names, titles, sizes, dates, and times of all the files within the
drive selected in the target drive list (GOT).
(The date and time show those of updated files.)
When the connection destination is an RCPU, only the program files read from the RCPU are
displayed. Other files in the same drive are not displayed.
A file to be read can be selected from the file list. (The selected file is highlighted.)
For selecting the file name selected in the file list (target controller), the file selection in the file list
(target controller) is canceled.
Displays the total data size of files selected in the file list (target controller) and file list (GOT).
2)
3)
3)
9)
7) 3)
Description