Mitsubishi Electric GOT2000 Series User Manual page 407

*4 For the system configuration of high speed data logger module, refer to the following manual.
➠
High Speed Data Logger Module User's Manual
*5 For the system configuration of the BOX data logger, refer to the following manual.
➠
BOX data logger User's Manual
*6 For the system configuration of the PLC CPU with the built-in Ethernet interface, refer to the following manual.
➠
MELSEC iQ-R Module Configuration Manual
QnUCPU User's Manual (Communication via Built-in Ethernet Port)
MELSEC-L CPU Module User's Manual (Built-In Ethernet Function)
*7 Applicable only with the Display I/F connection
For the system configuration for the CNC C80 side, refer to the following manual.
➠
C80 Series Connection and Setup Manual
*8 Applicable only with the Display I/F connection
For the system configuration for the CNC C70 side, refer to the following manual.
➠
C70 Setup Manual
(2) When using the wireless LAN extension interface
High Speed Data
Logger Module/
BOX Data Logger/
PLC CPU/
CNC C80/CNC C70
Connection cable
Controller
Connection
Model
type
*6
QD81DL96
*7
NZ2DL
*8
RCPU
*8
Ethernet
QnUDVCPU
connection
*8
LCPU
*9
R16NCCPU
Q173NCCPU-
*10
S01
*1 Set [Operation Mode] to [Station] in [Wireless LAN Setting] in the [GOT Setup] window.
➠
GT Designer3 (GOT2000) Screen Design Manual
*2 Set [Operation Mode] to [Access Point] in [Wireless LAN Setting] in the [GOT Setup] window.
➠
GT Designer3 (GOT2000) Screen Design Manual
*3 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*4 A straight cable is available.
When the GOT is directly connected to a controller via an Ethernet cable, a cross cable is applicable.
However, the GOT does not support the direct connection for the controller. Set the IP address on the controller side.
*5 A length between a hub and a node.
Wireless LAN access
point or station
Maximum
*3*4 segment
Connection cable
length
• 100BASE-TX
Shielded twisted pair
cable (STP) or
unshielded twisted pair
cable (UTP) of
category 5 or higher
100m
• 10BASE-T
Shielded twisted pair
cable (STP) or
unshielded twisted pair
cable (UTP) of
category 3 or higher
Wireless LAN access
point or station
*5
Model name
Wireless access point
For the connectable
access point and
system devices, refer to
the following Technical
News
➠
List of Valid Devices
Applicable for
GOT2000 Series
(GOT-A-0064)
Use a wireless LAN
station that conforms to
the specifications of the
wireless LAN
communication unit.
For the specifications of
the wireless LAN
communication unit,
refer to the following.
➠
GOT2000 Series
User's Manual
(Hardware)
12.2 Specifications
GOT
GOT
Number of
connectable
Option
equipment
Model
device
*1
GT25- GT27
WLAN *1
GT25
16 GOTs
*2
GT25- GT27
WLAN
*2
GT25
12 - 3
12