Hard Copy Output - Mitsubishi Electric GOT2000 Series User Manual

5) [Positioning] key
Changes to the positioning operation screen.
➠
■5. Positioning operation screen
6) [Without Motor] key
Changes to the motor-less operation screen.
➠ ■6. Motor-less operation screen
7) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠

9.4.8 Hard copy output

8) [Cancel Print] key
The touch operation of this key is invalid.
9.4.8 Hard copy output
This section describes how to store the screen to the SD card in the BMP or JPEG file format when the servo amplifier
monitor is executed.
Hard copy output operations are performed by touching the [Print Screen] or [Cancel Print] key.
The output target of hard copy can be set in [Hard Copy] of GT Designer3 (GOT2000).
For details of hard copy setting, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
9.4 Operations of Servo Amplifier Monitor Screens
9
9 - 41