Mitsubishi Electric GOT2000 Series User Manual page 621

■1. Displaying the drive recorder screen with a special function switch
To use a special function switch, place the switch on a user-created screen.
For the setting method, refer to the following.
➠ GT Designer3 (GOT2000) Screen Design Manual
(1) Settings of the special function switch
Set the following items for the special function switch.
Item
Window size
Graph waveform size
Connection destination
(2) Settings for using the system window
When the drive recorder screen is displayed with a special function switch, the screen appears as a system window.
Displaying such a system window requires an overlap window.
Set an overlap window to be used as the system window in the project.
For the setting method, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
■2. Starting the function by using the special function switch (System launcher)
You can start the drive recorder from a user-created screen by selecting the connection destination with a special
function switch (System launcher).
User-created screen having
a special function switch
(System Launcher) placed
Start the system launcher.
Specify the window size for the [Graph waveform] screen.
Specify the size of the graph display area on the [Graph waveform] screen.
➠
23.5 [Graph waveform] screen
Specify a servo amplifier to be connected, and specify a controller through which the servo amplifier is
connected to the GOT.
Thus, upon displaying the drive recorder screen, the GOT reads drive recorder information automatically.
System configuration screen
[×] key
[End] key
POINT POINT POINT
When the system launcher does not support the connection destination
When the system launcher does not support the set connection destination, a dialog appears at
the startup.
For the details of the system launcher function, refer to the following.
➠
2. SYSTEM LAUNCHER
Description
The [Drive recorder information list]
screen appears.
Select the target function.
23.3 Operations for Display
23
23 - 5