13.5 Switching the Display Format
You can switch the display format (16-bit (one-word) module/32-bit (two word) module or decimal number/hexadecimal
number) of word device and timer/counter values displayed on the FX ladder monitor screen, and whether to display the
comments to the target devices.
13.5.1
Display switching of 16-bit (one-word)/32-bit (two-word) modules
During monitoring, the present values of word devices (except timers and counters) are displayed in the 16-bit or 32-bit
module. These modules switch alternately each time you press the [16/32Bit] key.
(Operation example: Switch 16-bit (one-word) module display to 32-bit (two-word) module display.)
Step 1.
Touch [Mon.].
Step 2.
Touch [Menu].
Step 3.
Touch [16/32Bit].
Step 4.
The word devices are displayed in the 32-bit (two-word) module.
POINT
POINT
POINT
Displaying timers and counters
You cannot switch the 16-bit (one-word) or 32-bit (two-word) module with regard to the present
and set values of timers and counters. The GOT automatically selects to display them in the 16-
bit (one-word) or 32-bit (two-word) module.
Touch "Mon."
Device values displayed
Touch "Menu"
Menu window
Touch
"16/32Bit"
13.5 Switching the Display Format
13
13 - 15