Precautions - Mitsubishi Electric GOT2000 Series User Manual

■5. When using Ethernet connection
The intelligent module monitor can monitor the intelligent function module on the base of the PLC CPU assigned the IP
address.
(The station assigned in the Ethernet setting of GT Designer3 (GOT2000) can be monitored.)
To monitor another network, routing parameters have to be set to the GOT side and PLC side.
For the routing parameter setting, refer to the following.
Routing parameter setting for the GOT
➠ GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Routing parameter setting for PLC CPU
➠
Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
■6. When the intelligent module monitor monitors the master station of the MELSECNET/II
network on which any remote I/O station exists
Intelligent function modules on the base of remote I/O stations are not monitored.
8.2.3

Precautions

■1. Special function modules that cannot be monitored
Modules displayed as "SP" on the System Configuration screen cannot be monitored using the intelligent module
monitor.
To monitor these modules, use the system monitor function [BM MONITOR].
■2. Editing and reusing intelligent module monitor data
The project data for the intelligent module monitor cannot be edited by modifying or adding an object.
■3. Display provided when the QA1S6□ extension base unit is used with the QCPU (Q mode)
This precaution pertains to a situation where the QA1S6□ extension base unit is connected to the QCPU (Q mode) in a
station connected to the GOT.
In this case, the abbreviated format is displayed for the following intelligent function modules on the System
Configuration screen.
You can use the unit detail information to check the full format of the module displayed with the abbreviated format.
Unsupported intelligent function modules are displayed as "SP", and the corresponding modules cannot be monitored.
Installed module
A1S63ADA
A1SJ71PT32-S3
A1SJ71ID1-R4
A1SJ71ID2-R4-S1
A1S64TCTT(BW)-S1
A1S64TCRT(BW)-S1
63ADA
J71PT32-
J71ID
64TCTT/R
Model name displayed
8.2 Specifications
8
8 - 5