Mitsubishi Electric GOT2000 Series User Manual page 219

6.4.3 Other station monitor
This section describes the structure of the monitor screen and the common operations used when executing the other
station monitor.
■1. Display contents and keys functions: other station monitor menu
This section describes the other station monitor menu screen and the function of on-screen keys. The menu screen for
the other station monitor is displayed by touching a module number displayed on the host monitor screen.
By this other station monitor menu, each of the other station monitor can be specified.
(1) Displayed contents
1) [COM STA]
Switches to the communication status monitor for other stations.
➠ 6.4.4 Other station communication status monitor
This cannot be selected when a MELSECNET(II) local station is selected using the line monitor.
2) [D-Link]
Switches to the data link status monitor for other stations.
➠
6.4.5 Other station data link status monitor
This cannot be selected when a MELSECNET(II) master station or local station is selected using the line
monitor.
3) [P-MTR]
Switches to the parameter status monitor for other stations.
➠
6.4.6 Other station parameter status monitor
This cannot be selected when a MELSECNET(II) local station is selected using the line monitor.
4) [CPU OP]
Switches to the CPU operation status monitor for other stations.
➠
6.4.7 Other station CPU operation status monitor
This cannot be selected when a remote I/O station is selected using the line monitor.
5) [CPU RUN]
Switches to the CPU RUN status monitor for other stations.
➠ 6.4.8 Other station CPU RUN status monitor
This cannot be selected when a remote I/O station is selected using the line monitor.
6) [Loop]
Switches to the loop status monitor for other stations.
➠
6.4.9 Other station loop status monitor
The other station loop status monitor is not available in the following conditions.
• When a local station on the MELSECNET(II)network system is selected using the line monitor
• When a MELSECNET network system with coaxial cables is used
• When a station on the CC-Link IE controller network or CC-Link IE field network is selected using the line
monitor
2)
1)
5)
6)
3)
4)
6.4 Operation Procedures
6
6 - 31