Key Functions; Menus - Mitsubishi Electric GOT2000 Series User Manual

4.7.2

Key functions

The following shows the functions of keys used for operating the Ladder editor screen.
Key
[←Back]
[Edit]
[Find/Replace]
[Convert]
[Display]
[Online]
[X]
4.7.3

Menus

The following shows operations for the menus displayed on the Ladder editor screen.
■1. Edit menu
Key
[Undo]
[Redo]
[Restore program to the state
after conversion]
[Check program]
4 - 40
4.7 How to Operate Ladder Editor Screen
Returns the screen to the last screen that is displayed right before the Ladder editor screen appears.
The key is disabled when the last screen is the GOT utility screen or user-created monitor screen.
Displays the Edit menu.
➠
4.7.3 ■1. Edit menu
Displays the Find/Replace menu.
When the Find/Replace menu is displayed, touching the key closes the menu.
➠
4.7.3 ■2. Find/Replace menu
Displays the Convert menu.
➠
4.7.3 ■3. Convert menu
Displays the Display menu.
➠
4.7.3 ■4. Display menu
Displays the Online menu.
➠
4.7.3 ■5. Online menu
Exits the Ladder editor screen and returns the screen to the sequence program monitor (ladder) startup
screen.
The comment and note of the touched line can be displayed/hidden.
If the touched line is the first line in the ladder block, the statement of the touched ladder block can be
displayed/hidden.
Scrolls the display area up and down by one line.
Scrolls the display area up and down by one page.
Undoes the last edit operation.
The GOT can be returned to the state right after the last but one conversion,
write during RUN, Replace Device or Change open/close contact.
Redoes the operation which was undone using the [Undo] key.
Restores the edited ladder to the state just after conversion.
Executes the program check to check if programs have consistency or
double coils do not exist.
Function
Function Reference section
-
-
-
-