Mitsubishi Electric GOT2000 Series User Manual page 354

(12) CNC C80
Item
System file
Parameter
Machining program
Machine manufacturer macro
MDI program
*1
Tool offset
All tool data
Workpiece offset
Common variable
Safety parameter
*2
Safety ladder
APLC load module
*1
SRAM data
*1 The item can be backed up only.
*2
(13) Robot controller
Item
Error log
Error count
Common parameter
Mechanical parameter
Backup information
Mechanical information
System program
User program
Robot serial
Maintenance forecast information
10 - 12
10.2 Specifications
File used for the system
Parameter for operating the CNC
Program for running the CNC
Machine manufacturer macro program file
MDI program file
Offset of the tool length compensation and tool radius
compensation
All tool data including tool life and tool length compensation
data
Offset of the workpiece coordinate system from the machine
coordinate system
Common macro variables that can be used in different
machining programs
*2
Safety parameter file
Safety PLC program file (for the host station)
Safety PLC program file (for other stations)
APLC load module
SRAM data files
This data cannot be restored when the safety observation function of the CNC is enabled and a safety password is set for the
CNC.
Even though you cancel the safety password of the CNC, a write error occurs when the safety passwords of the CNC and the
restoration target file are mismatched.
Error log (all levels)
Error log (low level)
Error log (caution level)
Error log (high level)
Total errors
Common parameters
Parameter for robots
Setting information on backup
Information on the robot
System based program files
User-created robot programs
Serial No. for robots
Information on maintenance forecast
Description
Description
File name
SYSPRM.BIN
ALL.PRM
ALL.PRG
MACROALL.BIN
MDIALL.PRG
TOOL.OFS
TOOLALL.DAT
WORK.OFS
COMMON.VAR
SAFEPARA.BIN
SAFEPLC1.LAD
SAFEPLC2.LAD
APLC.BIN
SRAM.BIN
File name
AError.LOG
LError.LOG
CError.LOG
HError.LOG
TTLERROR.DAT
COMMON.PRM
(Machine name) #
(Machine No. 1 to
3).PRM
BKUP.SYS
MECHA.SYS
sysalgn.MB5/MB4
sysimac.MB5/MB4
Sysorg.MB5/MB4
Syssafe.MB5/MB4
Systembase.MB5/MB4
***.MB5/MB4
RobotSerial.ser
MFInfo.mfb