Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

14.3 Operations for Display

This section describes the operating procedure from when the GOT is powered on until the motion SFC monitor screen
appears.
■1. Start operation for the Motion SFC Monitor
(1) Normal operation
The following explains how to display the Motion SFC monitor screen after the GOT is turned on. The GOT must
have the required system application (extended function) installed on it.
Starting from the utility
*1
Display the utility.
After the utility screen is displayed, select [Monitor] →
[Motion SFC Monitor] from the main menu.
Set the channel No., network No. and
station No. for the motion controller CPU,
which is connected to the GOT.
Select a motion SFC program to display
the SFC diagram. *4
The SFC diagram monitor screen is
*5
displayed.
*1 For how to display the utility, refer to the following.
➠
Turn on the power to the GOT.
*3
GOT2000 Series User's Manual (Utility)
Start
Touch the special function switch.
Communication setting window
Program batch monitor window
End
14.3 Operations for Display
Starting from an extended
function switch (motion SFC
monitor) set in the project data
*2
14 - 5
14