Mitsubishi Electric GOT2000 Series User Manual page 172

10) SFC diagram display area
Displays a SFC program in the SFC diagram format.
• Step display
*1
Touching a step displays the zoom window.
➠
Touching a step with a jump destination block No. displays a block switching tab, and then the jump
destination block data is displayed in the SFC diagram display area.
• Transition condition display
*2
Touching a transition condition displays the zoom window.
➠
11) Device current value display area
Displays the current values of word devices displayed in the SFC diagram display area.
12) Message display area
Displays error messages and others.
13) Automatic scroll status display area
Displays [Scrolling automatically] with the automatic scroll mode.
Nothing is displayed without the automatic scroll mode.
14) Number of active steps
Displays the number of active steps in the displayed block.
Touching the item displays the active step list window.
➠
(1) Display mode at first display of SFC diagram monitor screen
The display mode state at the first display of the SFC diagram monitor screen differs depending on the SFC program
format.
For the display mode of SFC programs, refer to the following.
➠
5 - 22
5.6 How to Operate SFC Diagram Monitor Screen
An operation output sequence program is displayed only in the MELSAP-L program display mode.
➠
5.6.3 ■2. [Display] menu
5.6.1 ■2. Zoom window
A transition condition sequence program is displayed only in the MELSAP-L program display mode.
➠
5.6.3 ■2. [Display] menu
5.6.1 ■2. Zoom window
5.6.3 ■2. (2) Active step list window
SFC program format
MELSAP3 format
MELSAP-L format
5.3.3 ■2. Setting display mode of SFC programs
Step No.
Step
Operation output sequence program
Comment
Jump destination block No.
Transition condition No.
Transition condition
Transition condition sequence program
Comment
Without MELSAP-L program display mode
With MELSAP-L program display mode
*1
*2
State at the first display