Access Range; Precautions - Mitsubishi Electric GOT2000 Series User Manual

■4. Applicable hardware
Hardware
USB mouse
■5. Required special data
Write the package data, which contains the Q motion monitor data, to the GOT.
The available memory space of the user area for writing varies depending on the Q motion monitor data to be used.
For the Q motion monitor data size and how to write the data to the GOT, refer to the following.
➠
■6. Servo amplifiers whose parameter can be set
The Q motion monitor allows you to set the parameter of servo amplifiers shown below.
Motion controller CPU
Q172CPU, Q173CPU, Q172CPUN,
Q173CPUN
Q172HCPU, Q173HCPU
Q172DCPU, Q173DCPU, Q172DCPU-S1,
Q173DCPU-S1, Q170MCPU
Q172DSCPU, Q173DSCPU, Q170MSCPU,
Q170MSCPU-S1
7.2.2

Access range

The access range is the same as the access range when the GOT is connected to a controller.
For details of the access range, refer to the following.
➠
7.2.3

Precautions

■1. Main OS software package for motion controller
The only Main OS software package that can be used is SV13 or SV22.
■2. When setting parameters for Q172HCPU or Q173HCPU
When setting parameters for Q172HCPU or Q173HCPU, after parameter entry, set the switch on the CPU to STOP
and RUN again, or reset the CPU.
7 - 4
7.2 Specifications
GT Designer3 (GOT2000) Screen Design Manual
MR-H-B, MR-J-B, MR-J2-B, MR-J2S-B, MR-J2M, MR-J2-03B5
MR-J3-B, MR-J3-BS, MR-J3W-B, MR-J3-B-RJ006, MR-J3-B-RJ004
MR-J3-B, MR-J3-BS, MR-J3W-B, MR-J3-B-RJ006, MR-J3-B-RJ004, MR-J3-B-RJ080W
MR-J3-B, MR-J3-BS, MR-J3W-B, MR-J3-B-RJ006, MR-J3-B-RJ004, MR-J3-B-RJ080W, MR-J4-B,
MR-J4W-B, MR-J4-B-RJ
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
Servo amplifier