Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

10.3 Operations for Display

This section explains how to display the backup/restoration screen after the GOT is turned on.
Starting from
the utility
*1
Display the utility.
After the utility is displayed, touch
[Data control] → [Backup/restore]
from the Main Menu.
Backup/restoration
*1 For how to display the utility, refer to the following.
➠
*2 For how to set special function switches, refer to the following.
➠
*3 For the details, refer to the following.
➠
Turn on the power to the GOT.
Touch the special function switch.
GOT2000 Series User's Manual (Utility)
GT Designer3 (GOT2000) Screen Design Manual
11. MELSEC-L TROUBLESHOOTING
POINT POINT POINT
(1) How to display the utility
For how to display the utility, refer to the following.
➠
GOT2000 Series User's Manual
(2) When GOT has no project data
The backup/restoration can be started with the utility even though the GOT has no project
data.
Start
Starting from a special function
switch (Backup/Restore) set
in the project data
*2
Activate [Backup/restoration] on the
MELSEC-L troubleshooting screen.
End
10.3 Operations for Display
Starting from
the MELSEC-L
troubleshooting
*3
Touch [Backup
/restoration].
10 - 21
10