ABB Relion Technical Manual page 213

1MRK 502 048-UUS A
Name Values (Range)
k1 0.05 - 999.00
IMin1 1 - 10000
t1Min 0.000 - 60.000
HarmRestrain1 Off
On
DirMode2 Off
Non-directional
Forward
Reverse
IN2> 1 - 2500
t2 0.000 - 60.000
IMin2 1 - 10000
HarmRestrain2 Off
On
DirMode3 Off
Non-directional
Forward
Reverse
IN3> 1 - 2500
t3 0.000 - 60.000
IMin3 1 - 10000
HarmRestrain3 Off
On
DirMode4 Off
Non-directional
Forward
Reverse
Table continues on next page
Technical manual
Unit Step Default
- 0.01 0.05
%IB 1 100
s 0.001 0.000
- - On
- - Non-directional
%IB 1 50
s 0.001 0.400
%IB 1 50
- - On
- - Non-directional
%IB 1 33
s 0.001 0.800
%IB 1 33
- - On
- - Non-directional
Current protection
Description
Time multiplier for the dependent time delay for
step 1
Minimum operate current for step1 in % of
IBase
Minimum operate time for inverse curves for
step 1
Enable block of step 1 from harmonic restrain
Directional mode of step 2 (off, non-directional,
forward, reverse)
Operate residual current level for step 2 in % of
IBase
Independent (definite) time delay of step 2
Minimum operate current for step 2 in % of
IBase
Enable block of step 2 from harmonic restrain
Directional mode of step 3 (off, non-directional,
forward, reverse)
Operate residual current level for step 3 in % of
IBase
Independent (definite) time delay of step 3
Minimum operate current for step 3 in % of
IBase
Enable block of step 3 from harmonic restrain
Directional mode of step 4 (off, non-directional,
forward, reverse)
Section 8
207