Settings - ABB Relion Technical Manual

1MRK 502 048-UUS A
13.7.5
13.7.6
Technical manual
Name Type
OUT14 BOOLEAN
OUT15 BOOLEAN
OUT16 BOOLEAN

Settings

The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
Operation principle
With integer 15 on the input INP the OUT1 = OUT2 = OUT3= OUT4 =1 and the
remaining OUTx = 0 for (5≤x≤16).
OUTx represents a value when activated. The value of each of the OUTx is in accordance
with the table IB16A_1. When not activated the OUTx has the value 0.
In the above example when integer 15 is on the input INP the OUT1 has a value =1, OUT2
has a value =2, OUT3 has a value =4 and OUT4 has a value =8. The sum of these OUTx
is equal to 1 + 2 + 4 + 8 = 15.
This follows the general formulae: The sum of the values of all OUTx = 2
1≤x≤16 will be equal to the integer value on the input INP.
The Integer to Boolean 16 conversion function (IB16A) will transfer an integer with a
value between 0 to 65535 connected to the input INP to a combination of activated outputs
OUTx where 1≤x≤16. The sum of the values of all OUTx will then be equal to the integer
on input INP. The values of the different OUTx are according to the table below. When an
OUTx is not activated, its value is 0.
When all OUTx where 1≤x≤16 are activated that is = Boolean 1 it corresponds to that
integer 65535 is connected to input INP. The IB16A function is designed for receiving the
integer input locally. If the BLOCK input is activated, it will freeze the logical outputs at
the last value.
Values of each of the different OUTx from function block IB16A for 1≤x≤16.
The sum of the value on each INx corresponds to the integer presented on the output OUT
on the function block IB16A.
Description
Output 14
Output 15
Output 16
Section 13
Logic
x-1
where
497