Apparatus Control - ABB Relion Technical Manual

Section 12
Control
12.2
12.2.1
12.2.2
12.2.2.1
12.2.2.2
362

Apparatus control

Functionality
The apparatus control function APC8 for up to 8 apparatuses is used for control and
supervision of circuit breakers, disconnectors and grounding switches within a bay.
Permission to operate is given after evaluation of conditions from other functions such as
interlocking, synchronism check, operator place selection and external or internal
blockings.
In normal security, the command is processed and the resulting position is not supervised.
However with enhanced security, the command is processed and the resulting position is
supervised.
The switch controller SCSWI initializes and supervises all functions to properly select and
operate switching primary apparatuses. Each of the 8 switch controllers SCSWI may
handle and operate on one three-phase apparatus.
Each of the 3 circuit breaker controllers SXCBR provides the actual position status and
pass the commands to the primary circuit breaker and supervises the switching operation
and positions.
Each of the 7 circuit switch controllers SXSWI provides the actual position status and pass
the commands to the primary disconnectors and earthing switches and supervises the
switching operation and positions.
Switch controller SCSWI
Identification
Function description
Switch controller
Functionality
The Switch controller (SCSWI) initializes and supervises all functions to properly select
and operate switching primary apparatuses. The Switch controller may handle and operate
on one three-phase device.
IEC 61850 IEC 60617
identification identification
SCSWI -
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual