Signals - ABB Relion Technical Manual

Section 12
Control
12.2.5.4
12.2.5.5
Table 225: QCBAY Non group settings (basic)
Name Values (Range)
AllPSTOValid Priority
No priority
12.2.6
12.2.6.1
12.2.6.2
368

Signals

Table 223: QCBAY Input signals
Name Type
LR_OFF BOOLEAN
LR_LOC BOOLEAN
LR_REM BOOLEAN
LR_VALID BOOLEAN
BL_UPD BOOLEAN
BL_CMD BOOLEAN
Table 224: QCBAY Output signals
Name Type
PSTO INTEGER
UPD_BLKD BOOLEAN
CMD_BLKD BOOLEAN
LOC BOOLEAN
REM BOOLEAN
Settings
Unit Step
- -
Local remote LOCREM
Identification
Function description
Local remote
Functionality
The signals from the local HMI or from an external local/remote switch are applied via the
function blocks LOCREM and LOCREMCTRL to the Bay control QCBAY function
Default Description
0 External Local/Remote switch is in Off position
0 External Local/Remote switch is in Local position
0 External Local/Remote switch is in Remote position
0 Data representing the L/R switch position is valid
0 Steady signal to block the position updates
0 Steady signal to block the command
Description
Value for the operator place allocation
Update of position is blocked
Function is blocked for commands
Local operation allowed
Remote operation allowed
Default Description
Priority Priority of originators
IEC 61850 IEC 60617
identification identification
LOCREM -
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual