ABB Relion Technical Manual page 518

Section 14
Monitoring
Name Values (Range)
PDbRepInt 1 - 300
PZeroDb 0 - 100000
PHiLim -2000.0 - 2000.0
PLowLim -2000.0 - 2000.0
PLowLowLim -2000.0 - 2000.0
PLimHyst 0.000 - 100.000
QDbRepInt 1 - 300
QZeroDb 0 - 100000
QHiHiLim -2000.0 - 2000.0
QHiLim -2000.0 - 2000.0
QLowLim -2000.0 - 2000.0
QLowLowLim -2000.0 - 2000.0
QLimHyst 0.000 - 100.000
UGenZeroDb 1 - 100
PFDbRepInt 1 - 300
PFZeroDb 0 - 100000
IGenZeroDb 1 - 100
PFHiHiLim -1.000 - 1.000
PFHiLim -1.000 - 1.000
PFLowLim -1.000 - 1.000
PFLowLowLim -1.000 - 1.000
PFLimHyst 0.000 - 100.000
UDbRepInt 1 - 300
UZeroDb 0 - 100000
UHiHiLim 0.0 - 200.0
UHiLim 0.0 - 200.0
ULowLim 0.0 - 200.0
ULowLowLim 0.0 - 200.0
ULimHyst 0.000 - 100.000
IDbRepInt 1 - 300
IZeroDb 0 - 100000
Table continues on next page
512
Unit Step Default
Type 1 10
m% 1 500
%SB 0.1 120.0
%SB 0.1 -120.0
%SB 0.1 -150.0
% 0.001 5.000
Type 1 10
m% 1 500
%SB 0.1 150.0
%SB 0.1 120.0
%SB 0.1 -120.0
%SB 0.1 -150.0
% 0.001 5.000
%VB 1 5
Type 1 10
m% 1 500
%IB 1 5
- 0.001 1.000
- 0.001 0.800
- 0.001 -0.800
- 0.001 -1.000
% 0.001 5.000
Type 1 10
m% 1 500
%VB 0.1 150.0
%VB 0.1 120.0
%VB 0.1 80.0
%VB 0.1 60.0
% 0.001 5.000
Type 1 10
m% 1 500
1MRK 502 048-UUS A
Description
Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Zero point clamping
High limit in % of SBase
Low limit in % of SBase
Low Low limit in % of SBase
Hysteresis value in % of range (common for all
limits)
Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Zero point clamping
High High limit in % of SBase
High limit in % of SBase
Low limit in % of SBase
Low Low limit in % of SBase
Hysteresis value in % of range (common for all
limits)
Zero point clamping in % of VBase
Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Zero point clamping
Zero point clamping in % of IBase
High High limit (physical value)
High limit (physical value)
Low limit (physical value)
Low Low limit (physical value)
Hysteresis value in % of range (common for all
limits)
Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Zero point clamping
High High limit in % of UBase
High limit in % of VBase
Low limit in % of VBase
Low Low limit in % of VBase
Hysteresis value in % of range (common for all
limits)
Cycl: Report interval (s), Db: In % of range, Int
Db: In %s
Zero point clamping
Technical manual