Analog Input Signals A4Radr - ABB Relion Technical Manual

Section 14
Monitoring
Name Values (Range)
UnderTrigLe09 0 - 200
OverTrigOp09 Disabled
Enabled
OverTrigLe09 0 - 5000
NomValue10 0.0 - 999999.9
UnderTrigOp10 Disabled
Enabled
UnderTrigLe10 0 - 200
OverTrigOp10 Disabled
Enabled
OverTrigLe10 0 - 5000
14.4.4
14.4.4.1
14.4.4.2
556
Unit Step
% 1
- -
% 1
- 0.1
- -
% 1
- -
% 1

Analog input signals A4RADR

Identification
Function description
Analog input signals
Function block
A4RADR
^INPUT31
^INPUT32
^INPUT33
^INPUT34
^INPUT35
^INPUT36
^INPUT37
^INPUT38
^INPUT39
^INPUT40
IEC09000350-1-en.vsd
IEC09000350 V1 EN
Figure 252: A4RADR function block, derived analog inputs
Channels 31-40 are not shown in LHMI. They are used for internally
calculated analog signals.
Default Description
50 Under trigger level for analog channel 9 in % of
signal
Disabled Use over level trigger for analog channel 9 (on)
or not (off)
200 Over trigger level for analog channel 9 in % of
signal
0.0 Nominal value for analog channel 10
Disabled Use under level trigger for analog channel 10
(on) or not (off)
50 Under trigger level for analog channel 10 in %
of signal
Disabled Use over level trigger for analog channel 10
(on) or not (off)
200 Over trigger level for analog channel 10 in % of
signal
IEC 61850 IEC 60617
identification identification
A4RADR -
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual