Pulsetimer Function Block - ABB Relion Technical Manual

Section 13
Logic
13.3.1.4
478
Signals
Table 302: INVERTER Input signals
Name Type
INPUT BOOLEAN
Table 303: INVERTER Output signals
Name Type
OUT BOOLEAN
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).

PULSETIMER function block

Identification
Function description
PULSETIMER function block
Functionality
The pulse function can be used, for example for pulse extensions or limiting of operation
of outputs. The PULSETIMER has a settable length.
Function block
PULSETIMER
INPUT OUT
IEC09000291-1-en.vsd
IEC09000291 V1 EN
Figure 219: PULSETIMER function block
Signals
Table 304: PULSETIMER Input signals
Name Type
INPUT BOOLEAN
Default Description
0 Input signal
Description
Output signal
IEC 61850 IEC 60617
identification identification
PULSETIMER
Default Description
0 Input signal
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
- -
Technical manual