ABB Relion Technical Manual page 670

Section 17
Basic IED functions
664
LIODEV FAIL
LIODEV STOPPED
LIODEV STARTED
WDOG STARVED
RTE FATAL ERROR
FTF FATAL ERROR
RTE APP FAILED
RTE ALL APPS OK
GENTS RTC ERROR
GENTS RTC OK
IEC 61850 NOT READY
IEC 61850 READY
DNP 3 STARTUP
ERROR
DNP 3 READY
GENTS SYNC ERROR
GENTS TIME RESET
GENTS SYNC OK
CHANGE LOCK ON
CHANGE LOCK OFF
SETTINGS CHANGED
SETTINGS CHANGED
ANSI09000381 V2 EN
Figure 298: Self supervision, function block internal signals
Some signals are available from the INTERRSIG function block. The signals from
INTERRSIG function block are sent as events to the station level of the control system.
The signals from the INTERRSIG function block can also be connected to binary outputs
for signalization via output relays or they can be used as conditions for other functions if
required/desired.
Individual error signals from I/O modules can be obtained from respective module in the
Signal Matrix tool. Error signals from time synchronization can be obtained from the time
synchronization block INTERRSIG.
OR
S
e.g. BIO1- ERROR
R
SW Watchdog Error
Runtime Exec Error
File System Error
S
Runtime App Error
R
S
IEC 61850 Error
R
DNP 3 Error
S
R
OR
1MRK 502 048-UUS A
OR
OR
Internal Fail
OR
S
Real Time Clock Error
R
OR Internal Warning
S
Time Synch Error
R
S
Change lock
R
Setting groups changed
Settings changed
ANSI09000381-2-en.vsd
Technical manual