Disturbance Report Drprdre - ABB Relion Technical Manual

Section 14
Monitoring
14.4.2
14.4.2.1
14.4.2.2
14.4.2.3
14.4.2.4
Table 387: DRPRDRE Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
PreFaultRecT 0.05 - 9.90
PostFaultRecT 0.1 - 10.0
TimeLimit 0.5 - 10.0
Table continues on next page
546

Disturbance report DRPRDRE

Identification
Function description
Disturbance report
Function block
DRPRDRE
DRPOFF
RECSTART
RECMADE
CLEARED
MEMUSED
IEC09000346-1-en.vsd
IEC09000346 V1 EN
Figure 250: DRPRDRE function block
Signals
Table 386: DRPRDRE Output signals
Name Type
DRPOFF BOOLEAN
RECSTART BOOLEAN
RECMADE BOOLEAN
CLEARED BOOLEAN
MEMUSED BOOLEAN
Settings
Unit Step
- -
s 0.01
s 0.1
s 0.1
IEC 61850 IEC 60617
identification identification
DRPRDRE -
Description
Disturbance report function turned off
Disturbance recording started
Disturbance recording made
All disturbances in the disturbance report cleared
More than 80% of memory used
Default Description
Disabled Operation Enable/Disable
0.10 Pre-fault recording time
0.5 Post-fault recording time
1.0 Fault recording time limit
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual