Siemens SINUMERIK 840D Diagnostics Manual page 241

10.04
15310
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
15320
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
15330
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
15340
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
15350
Parameters:
Definitions:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
Channel %1 block %2 file requested during block search is not available
%1 = Channel number
%2 = Block number, label
During block search, a target has been specified with a program that has not been loaded.
- Alarm display.
Correct the specified search target accordingly or reload the file.
Clear alarm with the Delete key or NC START.
Channel %1 block %2 invalid block search command
%1 = Channel number
%2 = Block number, label
The block search command (type of search target) is smaller than 1 or greater than 5. It is
entered in column type of the block search window. The following block search orders are
allowed.
Type Meaning
1 Search for block number
2 Search for label
3 Search for string
4 Search for program name
5 Search for line number in a file
- Alarm display.
Modify the block search command.
Clear alarm with the Delete key or NC START.
Channel %1 block %2 invalid block number as search target
%1 = Channel number
%2 = Block number, label
Syntax error! Positive integers are allowed as block numbers. Block numbers must be
preceded by ":" and subblocks by an "N".
- Alarm display.
Repeat the input with corrected block number.
Clear alarm with the Delete key or NC START.
Channel %1 block %2 invalid label as search target
%1 = Channel number
%2 = Block number, label
Syntax error! A label must have at least 2 but no more than 32 characters, and the first
two characters must be alphabetic or underscore characters. Labels must be concluded
with a colon.
- Alarm display.
Repeat the input with corrected label.
Clear alarm with the Delete key or NC START.
Channel %1 block %2 search target not found
%1 = Channel number
%2 = Block number, label
The specified program has been searched to the end of the program without the selected
search target having been found.
1 Alarms
1-241