Siemens SINUMERIK 840D Diagnostics Manual page 507

10.04
105060
Definitions:
Remedy:
Program Continuation:
105061
Definitions:
Remedy:
Program Continuation:
105062
Definitions:
Remedy:
Program Continuation:
105063
Parameters:
Definitions:
Remedy:
Program Continuation:
105064
Definitions:
Remedy:
Program Continuation:
105070
Definitions:
Remedy:
Program Continuation:
105075
Definitions:
Remedy:
Program Continuation:
109001
Definitions:
Remedy:
Program Continuation:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
Please wait: Initilization of the cycle support
The cycle description files are interpreted and prepared for display on the screen.
--
Internal
Error when opening the file!
The specified file could not be opened.
System-internal error that does not occur in normal operation.
--
Internal
Error when closing the file!
The specified file could not be closed.
System-internal error that does not occur in normal operation.
--
Internal
Error when positioning in the file %1!
%1 = File name
No positioning could be done in the specified file.
System-internal error that does not occur in normal operation.
--
Internal
Error when reading the file!
The specified file could not be read.
System-internal error that does not occur in normal operation.
--
Internal
Please wait: Initialization of the simulation started!
The graphic travel path is being initialized.
--
Internal
Not enough axes in the current channel? > Contour with default axis names: X, Z !
The default axis names for the required axes are used.
--
Internal
No switchover: Switchover disable set in current PLC
MMC would like to go offline from this NCU.
The MMC switchover is disabled in the MMC PLC online interface in DB19.
(MMCx_SHIFT_LOCK = TRUE, x = 1,2)
--
Internal
1 Alarms
1-507