Siemens SINUMERIK 840D Diagnostics Manual page 652

1 Alarms
400131
Definitions:
Reactions:
Remedy:
Program Continuation:
400132
Definitions:
Reactions:
Remedy:
Program Continuation:
400133
Definitions:
Reactions:
Remedy:
Program Continuation:
400134
Definitions:
Reactions:
Remedy:
Program Continuation:
400135
Definitions:
Reactions:
Remedy:
Program Continuation:
400136
Definitions:
Reactions:
Remedy:
Program Continuation:
400137
Definitions:
Reactions:
Remedy:
Program Continuation:
1-652
Delete DB 31 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 32 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 33 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 34 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 35 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 36 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 37 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04