Siemens SINUMERIK 840D Diagnostics Manual page 520

1 Alarms
112325
Definitions:
Reactions:
Remedy:
Program Continuation:
112326
Definitions:
Reactions:
Remedy:
Program Continuation:
112327
Definitions:
Reactions:
Remedy:
Program Continuation:
112328
Definitions:
Reactions:
Remedy:
Program Continuation:
112329
Definitions:
Reactions:
Remedy:
Program Continuation:
112330
Definitions:
Reactions:
Remedy:
Program Continuation:
112340
Definitions:
Reactions:
1-520
Exchange swivel head.
The operator is prompted to replace the specified swivel head in the spindle with the new
swivel head.
- Alarm display.
Exchange swivel head.
When doing this, please follow the machine manufacturer's instructions.
Internal
Set swivel head
The operator is prompted to set the swivel head in accordance with the specified data.
- Alarm display.
Set swivel head.
When doing this, please follow the machine manufacturer's instructions.
Internal
Angle not in permissible area
The programmed machining cannot be carried out with the swivel head.
- Alarm display.
If necessary, clamp the workpiece differently.
Internal
Angle adapted to angle grid.
Due to the angle grid, the swivel head could not be set exactly to the specified angle.
- Alarm display.
Machining can be continued with the specified values, but it will not correspond exactly to
the programming.
Internal
Set swivel head/table
The operator is prompted to set the swivel head/table in accordance with the specified
data.
- Alarm display.
Set swivel head/table.
When doing this, please follow the machine manufacturer's instructions.
Internal
Set swivel table.
The operator is prompted to set the swivel table in accordance with the specified data.
- Alarm display.
Set swivel table.
When doing this, please follow the machine manufacturer's instructions.
Internal
Acknowledgement not possible, as axes have not been referenced
In Safety Integrated a user acknowledgement can only be made after the reference point
has been approached.
- Alarm display.
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04