03.04
No. 82
Explanation
Not allowed if
Remedy
No. 83
Explanation
Not allowed if
Remedy
No. 84
Explanation
Not allowed if
Remedy
No. 85
Explanation
Not allowed if
Remedy
No. 86
Explanation
Not allowed if
Remedy
No. 87
Explanation
Not allowed if
Remedy
No. 88
Explanation
Not allowed if
Remedy
No. 89
Explanation
Not allowed if
Remedy
No. 90
Explanation
Not allowed if
Remedy
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
Start a program in the TEACH IN submode (VDI signal: NC Start).
See 33 and 5
-
Start a program in the TEACH IN submode (VDI signal: NC Start).
See 33 and 5
-
Reorganize block processing.
-
-
Activate an "ASUB" user interrupt in a manual mode (VDI signal: ASUB interface, digital-
analog interface).
See 10
-
Activate an "ASUB" user interrupt. Is only executed if the channel is in the READY status
(VDI signal: ASUB interface, digital-analog interface).
See 10
-
Perform an "ASUB" user interrupt (VDI signal: ASUB interface, digital-analog interface;
for further actions see 10, 11, 12, 85, 86).
-
-
Stop processing (VDI signal: Mode group stop).
-
-
Activate all machine data with the attribute (NEW_CONF) (NC_block: NEW_CONF).
-
-
Activate all machine data with the attribute (NEW_CONF) (NC_block: NEW_CONF with
block search).
-
-
1 Alarms
1-675