Siemens SINUMERIK 840D Diagnostics Manual page 496

1 Alarms
101201
Definitions:
Remedy:
Program Continuation:
101202
Parameters:
Definitions:
Remedy:
Program Continuation:
101203
Definitions:
Remedy:
Program Continuation:
101204
Definitions:
Remedy:
Program Continuation:
101205
Definitions:
Remedy:
Program Continuation:
101206
Definitions:
Remedy:
Program Continuation:
101207
Definitions:
Remedy:
Program Continuation:
101208
Definitions:
Remedy:
Program Continuation:
1-496
Safety-Integrated data confirmed
The SI data confirmation function was successful.
--
Internal
SI data is copied from axis %1 to drive %2
%1 = Axis name
%2 = Drive number
This message is output during the SI data copying function.
--
Internal
SI data not completely copied
An error occurred during the SI data copying function; this caused the SI data to be cop-
ied incompletely or not at all.
--
Internal
SI data not confirmed
The SI data confirmation function was not executed because an error occurred during the
processing.
--
Internal
Drive data changed? -> Don't forget to save the boot files!
When exiting the drive machine data images, the operator is reminded to save the boot
files so that drive machine data that may have been changed is not lost.
--
Internal
Search action running, pleas wait
The search function was initiated in the machine data images.
--
Internal
Position at $MN_
A list image, e.g. general machine data, was selected.
The MMC100 attempts to position at the datum selected last in this image.
--
Internal
SI data confirmed: Axis 1
In the start-up area the function "Confirm Safety Integrated Data" has been started.
The message was output during this function in order to provided the user with an
acknowledgement regarding the operation of the function.
--
Internal
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04