Inserting The Neoprene Weather Strip; Rebuilding The Trolley For Transporting The Table Base - Philips CARDIOMD Service Manual

Installation
8.3.3.9

Inserting the Neoprene Weather Strip

Procedure
1. Insert the 15 × 20 mm neoprene weather
strip shipped with the system between the
outside edge of the gantry frame and the
floor.
This will prevent dirt from entering
underneath the gantry.
2. Cut the strip to fit between the mounting
plates.

8.3.3.10 Rebuilding the Trolley for Transporting the Table Base

Procedure
Use the two wheel bars and the rectangular
plywood plate to build a trolley:
1. Mount the wheel bars to the plate using 4
pcs. M10 × 30 mm screws (shipped with
the plate). Use an 8 mm Allen wrench to
tighten the screws.
2. Cut the strap, and remove the 2 side
covers from the table base.
3. Store the covers for later use.
8-34 CardioMD Service Manual
Details
Details
1MAN0158-H11 04-2005 CSIP Level 1