Philips CARDIOMD Service Manual page 415

Procedure
4. Unscrew the two wires from the collision
sensors to be replaced.
The connector pinout is shown to the right.
5. Mount the new set of collision sensors by
reversing the steps 1 to 4.
Note. Sensors must be mounted square and
flush so that they mate with the cover surface
evenly across their surface.
1MAN0158-H11 04-2005 CSIP Level 1
Details
CardioMD AC Option
1
2
3
4
5
6
7
8
CardioMD Service Manual 12-67