Philips CARDIOMD Service Manual page 378

Repair Procedures
Procedure
7. Click the Exit button to return to the
Persistence page.
8. If required, use the hand controller to fine
adjust the position of the detector
assembly.
A convenient position is approximately:
Det ang.: – 45°
Det Y: 1180 mm
Det X: 0 mm.
CAUTION
Procedure
9. On the acquisition PC, click the Close
button in the upper right corner of the
Persistence page to close down the
CardioMD application.
Reconfiguring the CardioMD Software
The following steps describe how to modify the CardioMD system's software configuration for
use without the AC option. However, these steps need only be performed if the camera is to be
used without the AC option. If you are just removing the transmission scanners for service
purposes, proceed to the section Powering Down the Gantry on page 12-31.
Procedure
10. Click the Windows Start button.
11. Then select Programs, Accessories and
Notepad.
12. In the Notepad window, select File, Open.
13. In the Open dialog box, select All files
from the Files of Type drop-down list.
14. Select the file:
C:\Cardiocam\ACoption.ini
click Open.
12-30 CardioMD Service Manual
Details
Caution. Exercise caution when using the hand controller to position the
gantry. Observe that the transmission scanners and other parts of the detector
assembly do not collide with the patient table or other objects.
Details
Details
and
1MAN0158-H11 04-2005 CSIP Level 1