Philips CARDIOMD Service Manual page 258

Installation
29. Mount the LED box using four M6 screws
from underneath the top plate.
The photo on the right shows the assembled
and mounted wall-mount PC stand.
The next step consists in mounting wiremolds and routing cables. Proceed as follows:
Procedure
1. Route wiremolds nicely from the wall-
mount to the gantry.
Use the adhesive on the wiremolds to
attach them to the wall.
The wiremolds provided with the system
include angles and turns needed for most
installations.
In case you need additional parts, these can be
obtained locally.
Note. The adhesive on the wiremolds is only intended as an aid when installing. The adhesive is
not sufficiently strong to keep wiremolds in place for longer periods of time.
8-56 CardioMD Service Manual
Details
1MAN0158-H11 04-2005 CSIP Level 1