ABB +N5600 Firmware Instructions page 105

Setpoint
Sleep boost step (40.46)
Actual value
Non-inverted
(40.31 = Not inverted (Ref -
Wake-up level
(Setpoint - Wake-up deviation [40.47])
Actual value
Wake-up level
(Setpoint + Wake-up deviation [40.47])
Inverted (40.31 = Inverted (Fbk -
PID controller output
t
sd
Sleep level
(40.43)
Tracking
In tracking mode, the PID block output is set directly to the value of parameter
(or 41.50) Set 1 tracking ref
so that no transient is allowed to pass on to the output, so when the tracking mode is
left, normal process control operation can be resumed without a significant bump.
Settings
• Parameter 96.04 Macro select
• Parameter groups
(page 353).
Fbk))
Ref))
= Sleep delay (40.44)
t < t t
sd sd
selection. The internal I term of the PID controller is set
(macro selection)
40 Process PID set 1
Sleep boost time (40.45)
Wake-up delay
(40.48)
Sleep mode
STOP
(page 341) and
Program features 105
Time
Time
Time
Time
START
41 Process PID set 2
40.50