ABB +N5600 Firmware Instructions page 173

No. Name/Value
06.32 MSW bit 13 sel
False
True
Other [bit]
06.33 MSW bit 14 sel
False
True
Other [bit]
06.36 LSU Status Word
Bit Name
0 Ready on
1 Ready run
2 Ready ref
3 Tripped
4...6 Reserved
7 Warning
8 Modulating
9 Remote
10 Net ok
11...12 Reserved
13 Charging or
ready run
14 Charging
15 Reserved
0000h...FFFFh
Description
Selects a binary source whose status is transmitted as bit 13
of 06.11 Main status word.
0.
1.
Source selection (see Terms and abbreviations
Selects a binary source whose status is transmitted as bit 14
of 06.11 Main status word.
0.
1.
Source selection (see Terms and abbreviations
(Only visible when supply unit control activated by 95.20)
Shows the status of the supply unit.
See also section Control of a supply unit (LSU)
and parameter group 60 DDCS
This parameter is read-only.
Description
1 = Ready to switch on
1 = Ready to operate, DC link charged
1 = Operation enabled
1 = A fault is active
1 = A warning is active
1 = The supply unit is modulating
1 = Remote control (EXT1 or EXT2)
0 = Local control
1 = Supply network voltage OK
1 = Bit 1 or bit 14 active
1 = Charging contactor closed
0 = Charging contactor open
Supply unit status word.
Parameters 173
on page 148). -
on page 148). -
(page 77),
communication.
Def/FbEq16
False
0
1
False
0
1
-
1 = 1