ABB +N5600 Firmware Instructions page 193

No. Name/Value
11.09 DIO2 function
Output
Input
Frequency
11.10 DIO2 output source
11.11 DIO2 ON delay
*DIO status
**Delayed DIO status
t = 11.11 DIO2 ON delay
On
t = 11.12 DIO2 OFF delay
Off
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
**Indicated by 11.02 DIO delayed
0.0 ... 3000.0 s
11.12 DIO2 OFF delay
0.0 ... 3000.0 s
11.38 Freq in 1 actual
value
0 ... 16000 Hz
11.39 Freq in 1 scaled
-32768.000 ...
32767.000
Description
Selects whether DIO2 is used as a digital output or input, or a
frequency output.
DIO2 is used as a digital output.
DIO2 is used as a digital input.
DIO2 is used as a frequency output.
Selects a drive signal to be connected to digital input/output
DIO2 when parameter 11.09 DIO2 function
For the available selections, see parameter
output source.
Defines the activation delay for digital input/output DIO2
(when used as a digital output or digital input).
t t
On Off
status.
Activation delay for DIO2.
Defines the deactivation delay for digital input/output DIO2
(when used as a digital output or digital input). See parameter
11.11 DIO2 ON delay.
Deactivation delay for DIO2.
Displays the value of frequency input 1 (via DIO1 when it is
used as a frequency input) before scaling. See parameter
11.42 Freq in 1 min.
This parameter is read-only.
Unscaled value of frequency input 1.
Displays the value of frequency input 1 (via DIO1 when it is
used as a frequency input) after scaling. See parameter
Freq in 1 min.
This parameter is read-only.
Scaled value of frequency input 1.
Parameters 193
is set to Output.
11.06 DIO1
t t
On Off
11.42
Def/FbEq16
Output
0
1
2
Running
0.0 s
1
0
1
0
Time
11.01 DIO status.
10 = 1 s
0.0 s
10 = 1 s
-
1 = 1 Hz
-
1 = 1